If you are considering installing a metal roof on your home, then it is important that you know the best practices for this type of installation. Metal roofs have many benefits, including durability and energy efficiency.
But they can be tricky to install and require special care during the installation process. We will share with you some tips for getting a quality metal roof installed so that your home has the protection it deserves!
Tip Number One:
– Installers should inspect any existing roofs before installing sheet metal, as even small leaks can cause significant damage during a rainstorm.
Tip Number Two:
– Before the installer starts, make sure that all necessary permits have been obtained and your roof is prepared for installation (e.g., any chimneys or vents should be removed).
Tip Number Three:
– The installer needs to be careful not to install metal components too close to the ground.
Tip Number Four:
– The installer should also be careful not to install metal components too close together, as this can lead to a buildup of heat that could contribute to rusting or sagging later on.
Tip Number Five:
– Sheets of metal need ample ventilation so they don’t become deformed.
Tip Number Six:
– Some manufacturers recommend leaving three inches between sheets of metal. The installer should also be careful not to install too many rows side by side, as this will lead to a buildup of heat that could contribute to rusting or sagging.
Tip Number Seven:
– If your roof has some slope, the installer will need to use a cut-in flashing around the perimeter of the roof.
Tip Number Eight:
– The correct type of venting can help metal roofs last longer and be more energy-efficient.
Tip Number Nine:
– You should make sure that all vents are oriented in such a way as to pull air into the roof, not push it out.
Tip Number Ten:
– If your metal roof is installed over plywood sheathing, you should use a membrane sealant to cover the seams before backfilling with topsoil. This will help ensure that water doesn’t seep through between sheets of metal and lead to potential leaks or rusting.
Tip Number Eleven:
– Your metal roof should be manufactured and installed in accordance with standards set by the manufacturer or local authorities to ensure that it is safe for you, your family members, and those around you.
Tip Number Twelve:
– In most cases, a metal roof will last up to fifty years before needing a new roof.
Tip Number Thirteen:
– If you are building a new home or adding on, it is possible to get metal roofing that looks like traditional shingle roofs with some extra installation expenses and time.
Tip Number Fourteen:
– Check the warranty before buying your metal roof! Some have shorter lives than others depending on the materials used.
Tip Number Fifteen:
– If you’re worried about noise, metal roofs are very quiet and will not disturb your sleep or cause anxiety if living near an airport or other large building that requires a lot of maintenance.
Tip Number Sixteen:
– Metal roofing is also easier to clean than shingles and if they get too dirty it is easier to replace individual large panels rather than the entire roof.
Tip Number Seventeen:
– Metal roofs are also more fire-resistant because some types of metal will not ignite or catch on fire as easily as shingles might in a wildfire situation.
Tip Number Eighteen:
– Some metal roofs have a lower heat index than shingles.
Tip Number Nineteen:
– Metal roofing is also aesthetically pleasing and can be designed to suit any style of building, house, or home in the neighborhood!
Tip Number Twenty:
– You should consider these Top Tips before buying your next metal roof for maximum longevity and efficiency.
Number Twenty One:
– Always get a roofer with experience on metal roofs, as they will be able to provide you advice that someone without any experience might not be able to.
Number Twenty Two:
– Metal roofs are also more sustainable and environmentally friendly than asphalt shingles because they do not contain any petroleum products, which can lead to a whole host of pollution if it is released into the environment.
Number Twenty Three:
– The long-lasting qualities of metal roofing are also due to the fact that they have been designed using a special coating process which will last for many years.
Number Twenty Four:
– The strength of metal roofs is one of their main selling points, as it means you can install them on any type of building and know that they will be durable enough to withstand strong winds and heavy rainfall.
Number Twenty Five:
– Metal roofs are also easy to maintain, as they don’t require any regular maintenance and can be easily cleaned with a hose or broom if necessary.
Metal roofing is an excellent way to protect your home from the elements, but there are some considerations you should make before installing it. For example, if you have a lot of trees on your property or live in an area with windstorms, metal roofs may not be the best choice for protecting your house.
If this sounds like something that’s relevant to you and you want help deciding whether or not metal roofing will work for you, contact us today! We can advise you based on our expertise and experience working with people who need protection from Mother Nature’s fury.